Sedimentation Processes

Wastewater treatment is a process used to remove contaminants from wastewater and convert it into an effluent that can be returned to the water cycle. Once returned to the water cycle, the effluent creates an acceptable impact on the environment or is reused for various purposes (called water reclamation). The treatment process takes place in a wastewater treatment plant. There are several kinds of wastewater which are treated at the appropriate type of wastewater treatment plant. For domestic wastewater (also called municipal wastewater or sewage), the treatment plant is called a sewage treatment plant. For industrial wastewater, treatment either takes place in a separate industrial wastewater treatment plant, or in a sewage treatment plant (usually after some form of pre-treatment). Further types of wastewater treatment plants include agricultural wastewater treatment plants and leachate treatment plants. Processes commonly used in wastewater treatment include phase separation (such as sedimentation), biological and chemical processes (such as oxidation) or polishing. The main by-product from wastewater treatment plants is a type of sludge which is usually treated in the same or another wastewater treatment plant. Biogas can be another by-product if anaerobic treatment processes are used. Treated wastewater can be reused as reclaimed water. The main purpose of wastewater treatment is for the treated wastewater to be able to be disposed or reused safely. However, before it is treated, the options for disposal or reuse must be considered so the correct treatment process is used on the wastewater. Performance of state owned sewage treatment plants, for treating municipal waste water, and common effluent treatment plants, for treating effluent from small scale industries, is also not complying with prescribed standards. Thus, effluent from the treatment plants, often, not suitable for household purpose and reuse of the waste water is mostly restricted to agricultural and industrial purposes. The development of innovative technologies for treatment of wastewaters from various industries is a matter of alarming concern for us. Although many research papers have been reported on wastewater pollution control studies, but a very few research work is carried out for treatment of wastewater of steel industries, especially in reference to development of design of industrial effluent Treatment Plants (ETP) system. Another beneficial aspect of this research work will be recycling, reuse of water and sludge from steel industry The whole technologies for treating industrial wastewater can be divided into four categories:-Chemical, Physical, Biological and mathematical approaches.

Wastewater treatment is a process used to remove contaminants from wastewater and convert it into an effluent that can be returned to the water cycle. Once returned to the water cycle, the effluent creates an acceptable impact on the environment or is reused for various purposes (called water reclamation). The treatment process takes place in a wastewater treatment plant. There are several kinds of wastewater which are treated at the appropriate type of wastewater treatment plant. For domestic wastewater (also called municipal wastewater or sewage), the treatment plant is called a sewage treatment plant. For industrial wastewater, treatment either takes place in a separate industrial wastewater treatment plant, or in a sewage treatment plant (usually after some form of pre-treatment). Further types of wastewater treatment plants include agricultural wastewater treatment plants and leachate treatment plants. Processes commonly used in wastewater treatment include phase separation (such as sedimentation), biological and chemical processes (such as oxidation) or polishing. The main by-product from wastewater treatment plants is a type of sludge which is usually treated in the same or another wastewater treatment plant. Biogas can be another by-product if anaerobic treatment processes are used. Treated wastewater can be reused as reclaimed water. The main purpose of wastewater treatment is for the treated wastewater to be able to be disposed or reused safely. However, before it is treated, the options for disposal or reuse must be considered so the correct treatment process is used on the wastewater. Performance of state owned sewage treatment plants, for treating municipal waste water, and common effluent treatment plants, for treating effluent from small scale industries, is also not complying with prescribed standards. Thus, effluent from the treatment plants, often, not suitable for household purpose and reuse of the waste water is mostly restricted to agricultural and industrial purposes. The development of innovative technologies for treatment of wastewaters from various industries is a matter of alarming concern for us. Although many research papers have been reported on wastewater pollution control studies, but a very few research work is carried out for treatment of wastewater of steel industries, especially in reference to development of design of industrial effluent Treatment Plants (ETP) system. Another beneficial aspect of this research work will be recycling, reuse of water and sludge from steel industry The whole technologies for treating industrial wastewater can be divided into four categories:-Chemical, Physical, Biological and mathematical approaches.

Abstract. The paper presents a part of the scientific activity of GEOECOMAR team during the IAEA project RER 2/003 Marine Environmental Assessment of the Black Sea Region, on board of R/V “Prof. Vodyanitskyi ” and in laboratories. The Black Sea presents different sedimentological and geochemical characteristics in the eastern and western sub-basins. Whole sections of the Upper and Middle Holocene sediments were revealed in most cores recovered from the whole Black Sea basin. Scientific methods (grain size, X ray investigations, rate of sedimentation and radiogenic measurements, geochemistry characteristics of water and sediments) showed the general distribution of the bottom sediments, at the surface and downward, syn- and postdepositional sedimentary structures, lithological and geochemical compositions. As a result of detailed sedimentological studies in the whole Black Sea basin, for the first time a complete picture of the current grain size composition in the Upper Holocene sed...

Among all Earthly Elements, Water has great importance. Globally, we consume around 4 trillion cubic meters of water yearly of which a significant amount of it is thrown untreated into water bodies due to the high cost of the water treatment process. So, we are proposing the idea of using soluble powder having magnetic properties to settle suspended particles in a fraction of a minute. This process will reduce the cost of filtration of water by minimizing the maintenance of RO filters required, decreasing processes required for filtration of macromolecules.