580 California St., Suite 400
San Francisco, CA, 94104
Hybridized surface lattice modes in intercalated 3-disk plasmonic crystals for high figure-of-merit plasmonic sensing. Nanoscale, 13(7), 4092-4102.
r2d2lri is an automatic two-dimensional cubature algorithm that demonstrates the practical value of using an augmentation sequence consisting of (2 k ) 2 -copy lattices as a basis for numerical integration. This paper investigates use of... more
A thermodynamic cycle model is used to select an optimum adsorbent-refrigerant pair in respect of a chosen figure of merit that could be the cooling production (MJ m -3 ), the heating production (MJ m -3 ) or the coefficient of... more
The state of the art of the Institut Néel research activity in the field of diamond power devices will be described and discussed. The active layers of the device are based on boron-doped monocristalline (100) diamond (with doping level... more
HAL is a multi-disciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching and research institutions in France or abroad, or... more
1. What quantities govern the potential barrier height at metal/oxygenated (100) oriented diamond interfaces ? 2. Interface states and bonding at dielectric /oxygenated (100) oriented diamond interfaces 3. Conclusions 1. 1. Assessment of... more
Potential discontinuities and spatial profiles govern the electronic properties of elementary devices like Schottky diodes and metal/insulator/semiconductor (MOS) structures. At interfaces between oxygenated diamond and other materials,... more
Quality factors Q and figures of merit (FoM) are widely used to characterize the enhancement of a property of an observable mode or in optical sensing using plasmonic samples. We study a simple 1D metal-insulator-metal (MIM) planar... more
We propose a method to engineer the phonon thermal transport properties of low dimensional systems. The method relies on introducing a predetermined combination of molecular adsorbates, which give rise to antiresonances at frequencies... more
In medical applications, the early detection of breast cancer plays a vital role in enabling timely treatment and reducing mortality rates among women. With advancements in medical technology, the use of efficient antennas has become... more
In this paper, we investigate the influence of varying the thickness of noble metals, namely gold (Au), silver (Ag), and copper (Cu), and the incident light wavelength on the surface plasmon resonance (SPR) properties for biosensor... more
Sritam Kumar Satpathy, ∗ Vallabh Vibhu, † Sudev Pradhan, ‡ Bikash K. Behera, 3, § and Prasanta K. Panigrahi ¶ Department of Physics Indian Institute of Science Education and Research, Berhampur Bikash’s Quantum (OPC) Private Limited,... more
In this paper, we present an innovative electric-field-assisted magnetron-sputtering deposition method for films preparation. By grain boundary-engineering, we successeful obtained the ordered Sb2Te3 film with greatly high figure of merit... more
The search for evidence of extraterrestrial intelligence is placed in the broader astronomical context of the search for extrasolar planets and biomarkers of primitive life elsewhere in the universe. A decision tree of possible search... more
This research investigated the effects of scaling of parameters of junctionless transistors (JLT) with SiO2 gate oxide and Si3N4 gate oxide on the electrical characteristics of the two devices. It also compared the electrical performance... more
When completed, the DARHT-II linear induction accelerator (LIA) will produce a 2 kA, 18 MeV electron beam with more than 1500 ns current/energy "flat-top." In initial tests DARHT-II has already accelerated beams with current pulse lengths... more
N-type porous silicon can be used to realize electroosmotic pumps with high flow rates per applied potential difference. The porosity and pore size of porous silicon membranes can be tuned, the pore geometry has near-unity tortuosity, and... more
A figure of merit is proposed in order to optimize the self-organized growth of nanoscale elements into one-/two-dimensional arrays via a fine selection of the deposition/annealing conditions. This figure of merit has been designed to... more
Pb(Zr 1-x Ti x )O 3 thin films (x = 0.55 and 0.85) were prepared on fine grained, polished ZrO 2 ceramic substrates by a sol-gel method. The high thermal expansion of ZrO 2 relative to Si allows the preparation of thicker PZT films with... more
s of Papers in English Study of effect of coupling geometry in improvement of thermoelectric properties of polyaniline molecular junction Zahra Golsanamlou1 Meysam Bagheri Tagani1 Hamid Rahimpour Soleimani1* Received: 2016-6-4 Accept:... more
For optimizing the efficiency of the power switching devices, it is important to reduce the switching power losses. One method to minimize the switching power losses is to reduce the gate drain charge (QGD). In this paper, a 1.2 kV SiC... more
The Mach-Zehnder electro-optic modulator (MZM) was designed and fabricated using the AFM COMSOL program and the pulse laser deposition (PLD) technique. The PLD technique was used to deposit silicon, silicon oxide and LN thin lm.... more
We show that adding a thin dielectric layer with high refractive index on top of the metallic layer in surface plasmon resonance sensors in the Kretschmann-Raether configuration in the spectral mode causes a redshift of the resonance... more
The study offers new methods for understanding and simulating the radiofrequency, analog, and thermal characteristics of the FinFET at the 5nm CMOS technology node. The results of the thermal assessment show that changes in temperature... more
Here we present the design and implementation of a novel frequency synthesizer based on low phase noise digital dividers and a direct digital synthesizer. The synthesis produces two low noise accurate and tunable signals at 10 MHz and 100... more
The applicability of colour-quality metrics to solid-state light sources is validated and the results of the assessment of colour-rendition characteristics of various lamps are presented. The standard colour-rendering index metric or a... more
The glass industry faces critical decarbonisation challenges due to high energy demand and reliance on fossil fuels. This study presents a comprehensive techno-economic analysis of diverse decarbonisation pathways for flat glass... more
Herein, two simple con gurations of Fano resonance-based plasmonic sensors are proposed for temperature and biosensing applications. The device optimization and sensing performance are numerically investigated via two dimensional-nite... more
In this paper, we systematically investigate three different routes of synthesizing 2% Na-doped PbTe after melting the elements: (i) quenching followed by hot-pressing (QH), (ii) annealing followed by hot-pressing, and (iii) quenching and... more
The paper addresses the potentialities of silicon carbide as the material for protection components in Power Electronics. It may be a series protection and its operation is then to limit the current. It may be a parallel protection... more
Lowering the operating voltage of electrooptic modulators is desirable for a variety of applications, most notably in analog photonics 1,2 and digital data communications 3 . In particular for digital systems such as CPUs, it is desirable... more
Lowering the operating voltage of electrooptic modulators is desirable for a variety of applications, most notably in analog photonics 1,2 and digital data communications 3 . In particular for digital systems such as CPUs, it is desirable... more
Nanocrystals can be used as storage media for carriers in flash memories. The performance of a nanocrystal flash memory depends critically on the choice of nanocrystal size and density as well as on the choice of tunnel dielectric... more
We report on the measurements of monoenergetic neutrons from DD and DT fusion reactions by use of the capture gating method in a heterogeneous plastic-glass composite scintillation detector. The cylindrical detector is 5.08 cm in diameter... more
In this paper we show that state-of-the-art commercial off-the-shelf Flash memory chip technology (20 nm technology node with multi-level cells) is quite sensitive to ionizing radiation. We find that the fail-bit count in these Flash... more
In this work, the influence of downscaling bulk MOSFETs below the 100 nm range on their static and dynamic behaviour is analysed by means of a particle-based Monte Carlo simulator. Internal transport conditions are investigated throughout... more
In this article, the bias-dependence of intrinsic channel thermal noise of single-layer graphene field-effect transistors (GFETs) is thoroughly investigated by experimental observations and compact modeling. The findings indicate an... more
In-torch LA-ICP-MS was implemented into an in-house-built ICP-TOFMS system. The fast data acquisition capabilities of the new configuration allowed simultaneous multi-element measurement and readout of in-torch LA-ICP-MS signals with 30... more
In-torch LA-ICP-MS was implemented into an in-house-built ICP-TOFMS system. The fast data acquisition capabilities of the new configuration allowed simultaneous multi-element measurement and readout of in-torch LA-ICP-MS signals with 30... more
The present study aims to see the enhancement in thermoelectric properties of bismuth telluride (Bi2Te3) annealed at different temperatures (573 and 773 K) through silver (Ag) nano-inclusions (0, 2, 5, 10, 15 and 20 wt %). Transmission... more
The essential purpose of radar is to detect a target of interest and provide information concerning the target's location, motion, size, and other parameters. The knowledge about the pulse trains' properties shows that a class of signals... more
Recently, the n-type TiS 2 /organic hybrid superlattice (TOS) was found to have efficient thermoelectric (TE) properties above and near room temperature (RT). However, its TE performance and power generation at the temperature gradient... more
In the present work, a power law dissipative Carnot-like heat engine cycle of two irreversible isothermal and two irreversible adiabatic processes with finite time non-adiabatic dissipation is considered and the efficiency under two... more
The aim of this work is to design and implement an embedded system capable to characterize some relevant figures of merit of Gallium Nitride and Silicon Carbide transistors in a wide range of frequencies. In particular, the designed... more
This paper describes an experimental comparative study of the matching between conventional (rectangular gate shape) and Diamond (hexagonal gate geometry) n-channel Metal-Oxide-Semiconductor (MOS) Field Effect Transistors (MOSFETs), which... more