The Sub-Contractor Selection of Fly Over Construction Project

Syntax Literate ; Jurnal Ilmiah Indonesia

Unknown factors often contribute to project development delays, which can result in delayed upgrades and unforeseen costs. Depending on the type of project and the surrounding environment, each construction project carries a different set of risks. Therefore, different handling techniques are needed. To improve traffic safety and efficiency in using the Fly Over, the obstacles and challenges in the construction of the Fly Over include the issues of Covid-19, nature, economy, environment, human resources, management, finance, and project risks. The purpose of this research is to: Analyze the risks that may occur during the construction of the Fly Over and determine the appropriate handling method in the construction of the Fly Over. Based on the findings, there are 20 risks for contractors and 19 risks for consultants which are in the high category and are significant factors in project delays including the following risks: pandemic, natural, economic, environmental, HR and managemen...

Construction And Material Journal, 2022

Technological developments in the construction sector are expanding, also supported by government regulations. BIM (Building Information Modeling) is one of the technological developments in the construction world. It is expected to help workers minimize errors that will harm the project. Projects that humans still interpret are prone to errors due to human error. This study aims to model three dimensions that function to realize the plan, examine differences in the results of BIM-based quantity takeoff using Autodesk Revit software with conventional methods in one of the bridge structures in Cinere-Jagorawi Toll Project Section 3A, and interview BIM experts with an aim to determine the factors that can affect BIM-based QTO output from the user's perspective. The two QTO outputs produce a difference of ± 0.32% in the volume of the concrete structure and ± 2.28% in the reinforcement volume, where the BIM-based QTO results are lower than the conventional method. The factors that affect the output of BIM-based QTO from the user's point of view, namely (a) the long duration of BIM user's experience affects the accuracy and details in the modeling, which will affect the QTO output, and(b) the longer the duration of experience and practice time the higher the level of detail and accuracy. The results of the QTO are especially important in determining the overall project cost. An inaccuracy in conducting the QTO will have fatal consequences that can harm the project.

2020

The management of sub-contractors for companies engaged in construction services is one aspect of the company's durability to be able to complete the project that the selection is doing manually by viewing one single file That is sent by the company who wants to be a sub-contactor, it is of course besides very troublesome also inefficient and time consuming quite a while. In determining the winner of the Procurement Committee is still having difficulty to determine the standard of the company that will become a sub-contractor, not to mention the assessment is subjective so that the elected candidate is not the best candidate. The methods used in this research use Analytical Hierarchy Process (AHP) for weighting of criteria and for calculation of value using Simple Additive Weighting (SAW) of the results of the research obtained from the SAW method used Obtained by the best sub-contractor of PT. 4Cipta with a total of 0.962 from 5 alternatives listed.

Jurnal Ilmiah Teknologi Infomasi Terapan

Material konstruksi merupakan bagian yang sangat penting pada suatu proyek konstruksi. Hal ini dikarenakan segala kegiatan yang berhubungan dengan material mencakup lebih dari setengah biaya proyek, serta berpengaruh sangat besar pada penjadwalan. Karena itu, pemilihan pemasok yang tepat diperlukan. Pemilihan pemasok termasuk ke dalam multi-criteria decision making, di mana terdapat beberapa kriteria yang dipertimbangkan dalam pembuatan keputusan. Penelitian ini dilakukan untuk menentukan kriteria-kriteria dalam memilih pemasok terbaik material konstruksi untuk proyek jalan tol. Tahap awal adalah penetapan kriteria, kemudian menggunakan metode ANP untuk mendapatkan prioritas dari masing-masing kriteria. Hasil dari penelitian ini didapat tiga kriteria dengan prioritas tertinggi adalah kualitas produk (0,120), integritas personil perusahaan (0,091), dan kinerja pengiriman (0,083).

Konstruksia

Dalam melaksanakan pekerjaan pembangkit diharuskan ada suatu kontrak konstruksi yang dapat menghargai semangat keadilan atau keseimbangan antara hak dan kewajiban serta mudah diinterpretasikan oleh para pihak. Makalah ini terdiri dari perbandingan In-House Form of General Conditions of Contract in Indonesia terhadap Model Kontrak FIDIC conditions of contract for EPC/Turnkey. Selain itu bertujuan untuk menganalisis penyebab utama klaim yang sering terjadi pada proyek konstruksi pembangkit listrik di Indonesia. Kemudian mencocokkan penyebab klaim pada In-House Form of General Conditions of Contract, yang kemudian dibandingkan dengan FIDIC conditions of contract for EPC/Turnkey. Metodologi yang digunakan untuk menentukan penyebab klaim tertinggi adalah Relative Important Index (RII), kemudian untuk analisis perbandingannya digunakan Metodologi Comparative. Berdasarkan hasil analisis faktor, ditemukan sepuluh faktor dominan yang menyebabkan klaim di pekerjaan pembangkit, dengan tiga ter...

2015

Membuat keputusan adalah faktor penting dalam proyek konstruksi. Pemilihan vendor yang tepat pada proyek konstruksi berpengaruh pada kelancaran proyek konstruksi. Metode Analytic Hierarchy Process merupakan metode pengambilan keputusan yang digunakan untuk mengambil keputusan terhadap beberapa alternatif pilihan. Proses pengambilan keputusan diawali dengan menetapkan faktor-faktor atau kriteria yang mempengaruhi si pengambil keputusan dalam mengambil keputusan. Pengambil keputusan memberikan prioritas terhadap sepasang kriteria. Jika setiap pasangan kriteria sudah ditetapkan skala prioritasnya, maka data prioritas tersebut dimodelkan dalam matriks. Matriks akan menjalani proses normalisasi. Konsistensi pengguna metode AHP harus tetap terjaga agar solusi yang dihasilkan optimal. Untuk mengetahui tingkat kevaliditan sistem pemilihan vendor ini, hasil sistem akan diujikan ke 30 sampel. Hasil penelitian menunjukkan bahwa kevaliditan sistem sebesar 96,67% dari 30 sampel yang diuji.

Faculty of Engineering Muhammadiyah University of Surabaya, 2017

Build Operate Transfer concession cooperation is a form of cooperation between the public and private, in which the partnership was formed in order to fill the shortage of funds from the public (government). It is intended sustain the financing to be borne by the public (government) and the profit provision of building facilities. While the private sector to get the financial benefits derived from the management of the building during the period that has been set for later handed over to the authorities after the time runs out. Government (public) gives the right to use the land for a long period of time, while the private sector is obliged to construct a building plan that has been agreed by both parties as well as benefit from the commercialization of its management scheme. In acquiring colleagues from the private sector that can meet the main objective criterias needed to be considered and met in selecting a private partner and make the forms of cooperation BOT (Build Operate Transfer) which is mutually beneficial to both parties. Selection of the appropriate partners assessment criterias is also form of risk management, minimize things that are not profitable and build lasting cooperation while as small as possible problems happens later on the cooperation. This paper produces a criterias of the existing literature studies in Build Transfer Operation.

ABSTRAK : Dalam proyek konstruksi diperlukan ikatan kerja antara pengguna jasa dan penyedia jasa sebagai dasar hukum yang berbentuk kontrak konstruksi dan salah satu kontrak konstruksi yang dipergunakan di Indonesia yaitu FIDIC yang merupakan persyaratan umum kontrak yang didorong oleh institusi internasional pemberi pinjaman. Salah satu tipe kontrak FIDIC yaitu FIDIC Conditions of Contract for Plant and Design Build dimana penyedia jasa menyiapkan desain dan melaksanakan pembangunan sesuai desain dengan batasan persyaratan/kebutuhan pengguna jasa dan pengguna jasa menempatkan enjinir sebagai wakilnya dalam pengawasan pelaksanaan proyek, tipe kontrak ini digunakan dengan alasan tidak siapnya desain pada saat dilakukan tender dan dengan harapan bahwa risiko di pihak pengguna jasa akan mengecil. Dalam kontrak terkadang terjadi perbedaan baik interpretasi ataupun hal-hal lain sehingga menyebabkan tuntutan atau klaim yang bisa berlanjut ke dalam sengketa/dispute. Penelitian ini dilakukan untuk mengetahui faktor-faktor penyebab timbulnya klaim pada proyek yang menggunakan tipe kontrak ini. Telah diidentifikasi sebanyak 71 (tujuh puluh satu) faktor penyebab timbulnya klaim berdasarkan klausula dengan kajian pustaka yang kemudian dirancang dalam bentuk kuesioner yang dibagikan kepada pihak pengguna jasa dan penyedia jasa serta konsultan yang terlibat dalam pelaksanaan proyek dengan tipe kontrak ini. Melalui metode analisis faktor menggunakan piranti lunak SPSS didapatkan 7 (tujuh) faktor utama yang menjadi penyebab timbulnya klaim pada proyek dengan tipe kontrak ini yaitu Faktor kelalaian Pengguna Jasa yang berkaitan dengan pembayaran, Faktor kegagalan Kontraktor memperbaiki cacat mutu, Faktor hal yang mempengaruhi kemajuan pekerjaan, Faktor kegagalan menyelesaikan pekerjaan karena faktor keuangan para pihak, Faktor terkait Enjinir, Faktor administrasi kontrak dan item yang disiapkan Pengguna Jasa dan Faktor pelanggaran prosedur. ABSTRACT: In a construction project required working ties between employers and contractors as a legal basis in the form of construction contract and one of the construction contracts used in Indonesia is FIDIC, which is a contracts are driven by international institutional lenders. One type of the FIDIC contracts is FIDIC Conditions of Contract for Plant and Design Build services where contractors prepare design and carry out development in accordance with the design constraints employers requirements and employers put enjinir as its deputy in supervising the implementation of the project, the type of this contract is used to reason where the design unprepared at the time of the tender and the hope that risk on behalf of employers will shrink. Sometimes there is a difference in either contract interpretation or other things that causes the claim that could lead to the dispute. This study was conducted to determine the factors that cause the onset of the project claim that using

Administrative Law and Governance Journal

The problem of subcontracting construction work in government is interesting to discuss because in practice, construction work is a common thing to do. Therefore it is necessary to understand what subcontracting in construction work in government can be applied, bearing in mind that the current construction work is carried out by a subcontractor network. Three things that need to be considered when implementing subcontracts in government construction work, namely the determination of subcontracts, contract design, and subcontracting provisions. Keywords: Subcontracting, Construction, Government Abstrak Permasalahan subkontrak pekerjaan konstruksi di pemerintah menarik untuk dibahas, karena dalam praktik pekerjaan konstruksi merupakan hal yang biasa dilakukan. Oleh karena itu perlunya pemahaman subkontrak seperti apa di dalam pekerjaan konstruksi di pemerintah yang dapat diterapkan, mengingat pelaksanaan konstruksi saat ini dilakukan oleh jaringan subkontraktor. Ada empat hal yang p...