Academia.eduAcademia.edu

Outline

Title
Abstract
References
All Topics
Environmental Science
Pollution

Geological Behavior (GBR

Profile image of Rotimi SalamiRotimi Salami
https://doi.org/10.26480/GBR.01.2025.36.45
visibility

…

link

1 file

Abstract

The study investigated the importance and image behavior of integrated geophysical methods in mapping contaminant spread beneath the surface of a pollution site in Ogoniland, Southern Nigeria. Electrical Resistivity Tomography (ERT) and Ground Penetrating Radar (GPR) techniques constrained by Vertical Electrical Sounding (VES) data were employed to investigate the electrical properties of hydrocarboncontaminated soils that resulted from recent oil spills/leakage into the environment. Five (5) ERT and GPR lines and twenty-nine (29) VES data were acquired at the spill site. Basically, the electrical signatures from the resistivity measurements were able to image the subsurface layers and the associated contamination zone. GPR equally imaged the subsurface stratigraphy to a depth of 10.0 m beneath the surface. The interpretation of the five (5) ERT data showed consistency in the resistivity structure indicative of contaminant plumes with anomalously high electrical resistivity in the range of 1000-10,000 Ωm, a possible indication of hydrocarbon contamination. On the GPR radargram, regions of high electrical resistivities were in agreement with reduced GPR reflection behavior (shadow zones) and were limited to the near surface of the surveyed areas. Vertical electrical sounding delineated layers with high resistivity predominantly within the second and fourth geoelectric layers within pollution depths of 2.4 m and 11.9 m, respectively. As a result, the underground aquifer, relatively between 7.5 and 10.5 m, has been infiltrated by hydrocarbons. It can be seen from the study that geoelectric measurements on the surface can describe the distribution of hydrocarbon resistive zones as well as their conductive behavior that may be linked with the biodegradation of oil spills in the subsurface. Thus, the employment of these integrated methods for contaminant monitoring, hydrogeologic studies and remediation planning reduced the uncertainties, and they are of extensive relevance in mapping the geological behavior of polluted soils in contamination sites.

Related papers

Investigations of geoelectrical signatures at a hydrocarbon contaminated site
William A Sauck

Journal of Applied Geophysics, 2000

This study provides an evaluation of the utility and resolution of different geoelectrical methods in mapping contaminant distribution in the subsurface, and provides a window into the processes that may control their response at a site in Central Ž. Ž. Michigan. In situ and 2D surface resistivity, ground penetrating radar GPR , and electromagnetic methods EM constrained Ž. by soil boring data were used to investigate the electrical properties of a light nonaqueous phase liquid LNAPL contaminant plume that resulted from 50 years of leakage into a glacio-fluvial geologic setting. Overall, the electrical signature from the in situ resistivity measurements were best able to image the subsurface stratigraphy and the associated contamination zone. GPR also mapped the subsurface stratigraphy. In particular, the GPR recorded a reflector that is subparallel to the water table, and occurs a few meters above the current free product level, which is coincident with the top Ž. of an oil-stained, light-gray sand layer. Further, regions of attenuated GPR reflections shadow zones due to enhanced conductivities were found to be coincident with low apparent resistivities. 2D geoelectrical measurements successfully imaged the top of the saturated zone and the underlying clay layer, but was unable to resolve any anomalous region that could be attributed to the hydrocarbon contamination. Likewise, the EM results provided no evidence of the presence of the free product plume at depth. Throughout this investigation, geoelectric measurements consistently recorded low resistivities Ž. high apparent conductivities associated with zones containing the freerresidual product plume instead of high resistivities as has been suggested by the simple intuitive model. From this, it is inferred that substantial modification of the geochemical characteristics of the plume, surrounding media, and associated groundwater has occurred as a result of biogeochemical reactions. It is evident from this study that in situ resistivity measurements combined with surface geoelectrical measurements can characterize the distribution of conductive zones that may be associated with the biodegradation of LNAPL in the subsurface. Thus, the application of these techniques to hydrogeologic, contaminant monitoring, and remediation studies are far reaching.

View PDFchevron_right
Geoelectrical Characterisation of A Hydrocarbon Contaminated Site at Alesa-Eleme, Rivers State, Nigeria
IOSR Journals

The effect of crude oil and gas on soil resistivity was evaluated in order to characterize and determine the level of hydrocarbon contamination in the soil and the depth of groundwater contamination. Twelve vertical electrical soundings (VES) was carried out in the area using ABEM SAS 1000 TERRAMETER with electrode spacing (AB/2) ratio of 60m at intervals thus probing to a depth of about 20m. The data was interpreted with WINGLINK computer software. The result showed that there are four layers in the area with thickness varying between 0.11m and 5.12m. The apparent resistivity values of the contaminated soil at Alesa ranged from 93.37Ωm to 5336.63Ωm while that of the uncontaminated soil at Okirika ranged from 0.57Ωm to 113.60Ωm. The soil at Alesa thus depicts a random distribution of contaminant at the subsurface ranging from low impact zone to a very high impact zone to a depth of about 20m. It is therefore recommended that a deep and well grouted borehole be sunk to a depth beyond 35m to abstract clean, portable and uncontaminated water from the aquifer in the Alesa area.

View PDFchevron_right
Application of Vertical Electrical Sounding in Characterisation of a Hydrocarbon Impacted Site in Ikarama and Kalaba Communities of Bayelsa State, Southern Nigeria
iJSRED Journal

Ten (10) Vertical Electrical Soundings were carried out in a hydrocarbon impacted sites of Ikarama and Kalaba communities to investigate the effect of hydrocarbon spills on the subsurface resistivity distribution in the area. Four (4) other VES points in non-impacted areas of both communities were sampled as control. The geophysical survey was carried out with the aid of an ABEM SAS 1000 Terrameter set with a maximum current electrode (AB) spacing of200 m. The results of impacted sites show a topsoil with an average resistivity distribution of 2.03Ωm-93.6Ωm and thickness of 0.09m-0.463m, a second layer with resistivity ranging 1.57Ωm-35.8Ωm having a thickness of 1.13m-12.6m characteristic of clays and a third layer with resistivity ranging 2.83Ωm-3570Ωm with a thickness of 1.01m-12.6m indicative of saturated sandstones with intercalations of clays. Similarly, the un-impacted sites show respective resistivity distribution and thickness variations of 13.9Ωm-220Ωm and thickness of 0.02m-1.34m for the top soil, resistivity range of 5.23Ωm-56.6Ωm and thickness of 0.929m-5.26m for the second layer indicating clay and a third layer with resistivity of 73.3Ωm-966Ωm and thickness 5.57m-8.59m indicative of sandy-clays. The 1-D resistivity distribution indicated that most of the models started from a top soil of moderate high resistivity which could be attributed to near surface effect, the subsoil shows a slight decrease in resistivity which could be attributed to clay sand layer after which there is a sharp increase in resistivity which could be attributed to the presence of petroleum contaminants within the subsurface in the impacted sites contaminating shallower depths in the study area. The resistivity distributions of the current study indicate subsurface hydrocarbon contamination hence, other complementary geophysical and geochemical methods are recommended to map the extent of the contaminant dispersal.

View PDFchevron_right
Hydrocarbon oil-contaminated soil assessment using electrical resistivity topography
Waleed Abdullah

Journal of Engineering Research, 2014

In Kuwait, oil wells exploded in 1991 have created numerous massive oil lakes, which have subsequently dried and contaminated the soil. A research project was initiated to delineate the type and extent of contaminated soil using an area survey method, namely Electrical Resistivity Topography (ERT), to examine dry oil lakes located in Bahra, Subiya. The specific objective was to assess the applicability of the environmentally friendly ERT to assist in the design of measures to remediate the contaminated land. ERT results were generated by testing a grid in both contaminated and non-contaminated areas. In addition, conventional soil boreholes were used to explore the sub-surface profile and depth of contamination in these areas for comparison with ERT results. In-situ and laboratory physical and chemical tests were performed on soil samples collected from the site to identify the contamination type and concentration as well as variation in the physical properties of the soil profile with depth. Results indicated the contamination depth to be 1.2 m from the ground surface. These results were also confirmed by borehole analyses (chemical and physical). Chemical tests indicated that the contamination consists of hydrocarbons. The findings demonstrate that ERT can be used to establish a baseline in the assessment of potential hydrocarbon-contaminated sites and is applicable for determining the type and depth of contamination without the need for expensive and tedious boreholes and in-situ and laboratory soil testing.

View PDFchevron_right
Integrating Electrical Resistivity Tomography and Geochemical analysis to assess Hydrocarbon Contaminated Soil in Warri, Niger Delta, Nigeria
Raymond Opeh, Edeh Ogueh

Journal, 2021

Electrical resistivity tomography (ERT) and geochemical analysis were integrated to assess hydrocarbon contaminated soil in Warri area. Earth resistivity meter was used for the electrical imaging of the subsurface. Physico-chemical and geochemical parameters of groundwater samples were determined. The ERT results shows that the subsurface is saturated with hydrocarbon of resistivity values ranging from 11-5902 Ohm-m to the depth of 25m in most parts, reflecting varying degree of conductivity associated with changing lithology and fluid type. This low conductivity contaminant could be attributed to hydrocarbon incursion. The water samples show mild acidity with pH values in the range 4.3-6.6. Total Dissolved Solids (TDS) is low 69.37-89.32mg/L and conductivity ranges from 119.60-153.50 µS/cm. Iron content is fairly high (0.485-0.961mg/L). Groundwater samples analysis using ultra violet (UV) detector and gas chromatography (GC) show that Total Petroleum Hydrocarbons (TPH) as oil and grease is very low (< 0.01 mg/L and < 0.031mg/L) respectively. This further indicates the contamination of shallow aquifer in the study area. The results have shown that the study area has been degraded. It is recommended that geophysical investigation be carried out before drilling of wells. Boreholes should be drilled to the depth of at least 40m beneath the surface to exploit for groundwater, and periodic laboratory test of groundwater samples.

View PDFchevron_right
Geoelectrical characterization of a site with hydrocarbon contamination as a result of pipeline leakage
vladimir V A shevnin

SEG Technical Program Expanded Abstracts 2004, 2004

Resistivity method is used extensively in environmental impact studies. In this work, the results of the geoelectrical characterization of a hydrocarbons contaminated site are presented. Although the contamination grade of the study area is low, were mapped two contaminated zones into sandy aquifer. In addition, petrophysical parameters were estimated by recalculate of ground and water resistivity values in clay content, porosity and CEC values. Anomalous values of clay content, porosity and CEC indicate the presence of hydrocarbon contaminants. The correlation between geoelectrical results, petrophysical parameters and hydrocarbons contamination was verified in laboratory by electrical measurements made in pure and contaminated sand samples.

View PDFchevron_right
Geoelectric Tomography Study of Hydrocarbon Spill at IJEDODO Area, Abule Ado, Lagos
M. Oladapo

World Journal of Innovative Research, 2019

Geo-tomography study has been undertaken to determine the level of pollution occasioned by hydrocarbon spill at Ijedodo section of petroleum pipeline route at Ijedodo area of Abule Ado, Lagos. The field study involved the electrical resistivity tomography method using Dipole-Dipole electrode configuration. Traverse length of 1,870 m was occupied with electrode separations of 10 m and inter-dipole separation factor (n) varied from 1 to 8. The study area is underlain by the Dahomey Sedimentary Basin. The data are presented as field and theoretical pseudosections alongside 2-D resistivity structure. 2-D Resistivity Structure output presents inversion of the field data to obtain a model utilized for subsurface characterization. Observed high resistivity values are attributable to resistive sand units while low values obtained are diagnostic of conductive clay units. However, anomalously high resistivity values recorded are attributable to hydrocarbon invasion of some pore spaces. Dipole-Dipole field and theoretical pseudosections generated for the segment show predominance of conductive (clay) materials interspersed with slightly resistive (sand) materials beneath the southern half (1000 m) of the investigated segment. An isolated conductive feature (clay) was delineated beneath hydrocarbon pollution point. Finite Difference Method (FDM) inversion section of the investigated section however presents low resistivity materials (presumably clay) constituting the top segment within 180-970 m to depth of about 23 m. The section presents anomalously high resistivity constituents (diagnostic of severe hydrocarbon impact) at the lower segment in areas around 390-940 m and 1740-1870 m.

View PDFchevron_right
Geophysical Method of Investigating Groundwater and Sub-Soil Contamination – A Case Study
Cyril Nwankwo

American Journal of Environmental Engineering, 2012

Geophysical methods can be helpful in mapping areas of contaminated soil and groundwater. Electrical resistivity surveys were carried out at a site of shallow hydrocarbon contamination in Ahoada, South-South Nigeria. This was aimed at evaluating the subsoil conditions and groundwater quality of the area three years after the post-spill clean-up exercise. The geophysical investigation involved the Vertical Electrical Sounding (VES) technique using the Schlumberger configuration and the horizontal profiling method. The data from the two different approaches correlate well, and the generated profiles of the acquired data helped to map the contaminant plume, which was delineated as an area of high interpreted resistivities. The VES result shows that the subsurface layers up to a depth of 49 m is of moderate to high resistivity values (>200 Ώm) that may affect crops and groundwater development in the study area. However good aquifer can still be obtained from the depth of 30 m and above.

View PDFchevron_right
Geoelectrical characterization of a site with hydrocarbon contamination caused by pipeline leakage
Omar Delgado-Rodriguez

Geofisica Internacional, 2006

Vertical Electrical Sounding (VES) method is used extensively in environmental impact studies including hydrocarbon contamination. In this work, the results of the geoelectrical characterization of a contaminated site caused by pipeline leakage are presented. Geoelectrical study was performed with multi-electrode technology and 2D profile data interpretation. VES results from six parallel profiles were presented in resistivity sections and maps. Layered model of the site was found including aquifer and aquitard layers. Although the contamination grade of the site is low, we found two contaminated zones into sandy aquifer. Aquifer and aquitard were characterized by its resistivity, clay content, porosity and cation exchange capacity values. Recalculation of resistivity data into petrophysical sections and maps was performed by an inversion algorithm taking into account pore water salinity. Petrophysical parameters for uncontaminated areas estimated from resistivity are close to real ...

View PDFchevron_right
Geoelectrical characterization of an oil-contaminated site in Tabasco, Mexico
vladimir V A shevnin

2000

A geoelectrical characterization of an oil-contaminated site, where thirty years ago an oil well was drilled, was carried out using vertical electrical sounding (VES) method on 2D Resistivity Imaging technology and 2D interpretation. VES data were added by water resistivity measurements and soil resistivity analysis. The contaminated zones feature with low resistivity anoma- lies situated above groundwater level. The geoelectrical

View PDFchevron_right

References (41)

  1. Agbonofo, J. 2009. Development as conflict: Ogoni move ment, the state and oil resources in Niger Delta, Nigeria, Doctoral Thesis Available (online) http://repub.eur.nl/res/pub/32647/90-423- 03808_DOK/5B1/5D. Accessed 20 Dec 2024
  2. AGI. Earth Imager 2013. 2-D, 3-D resistivity inversion software, version 1.5.10.Advanced Geosciences Inc., Austin. Available from https://www.agiusa.com/agi-earthimager-3d
  3. Asseez, O.L. 1989. Review of the stratigraphy, sedimentation and structure of the Niger Delta. In: Kogbe (Ed.), Geology of Nigeria, Rock View (Nig.) Ltd., Jos, 311-324
  4. Atekwana, E. et al. 2002. Geophysical investigation of vadose zone conductivity anomalies at a hydrocarbon contaminated site: implications for the assessment of intrinsic bioremediation. Jour. of environmental & engineering geophysics, vol. 7, no. 3, pp. 103-110.
  5. Atekwana, E., Sauck, W., Werkema, D. 2000. Investigations of geoelectrical signatures at hydrocarbon contaminated site. Journal of Applied Geophysics. 44, 167 -180.
  6. Benard, J. 2023. Short note on the principles of geophysical methods for groundwater investigations. Retrieved July 7, 2023. Available from the link www.terraplus.com info@terraplus.com.
  7. Bery, A.A. 2016. Slope monitoring study using soil mechanics properties and 4d electrical resistivity tomography methods. Soil Mechanics and Foundation Engineering, 53(1): 24-29.
  8. Bodo, T., Lekpa, D. 2018. The petroleum exploitation and pollution in Ogoni, Rivers State, Nigeria: the community perspective. Eur Sci j;14(32):197. doi:10.19044/esj.2018.v14n32p197.
  9. Bradford, J.H. 2003. GPR offset-dependent reflectivity analysis for characterization of a high-conductivity LNAPL plume, SAGEEP 2003 symposium on the application of geophysics to environmental and engineering problems: San antonio, tx, Env. Eng. geophys. Soc., p. 238-252.Available from: https://www.researchgate.net/publication/265160820_multioffse t_gpr_methods_for_hyporheic_zone
  10. Bradford, J.H. 2004. 3D Multi-offset, multi-polarization acquisition and processing of GPR data: A controlled NAPL spill experiment: sageep 2004 proceedings, symp. appl. geophys. Env. eng. prblm: colorado springs, co, env. eng. geophys. soc., 514-527.
  11. De Vivo, B., Belkin, H.E., Lima, A. 2008. Environmental geochemistry: site characterization, data analysis and case histories. Elsevier, the Netherlands Linacre House, Jordan Hill, oxford ox2 8dp, uk
  12. Delaney, A., Peapples, P., Arcone, S. 2001. Electrical resistivity of frozen and petroleum-contaminated fine-grained soil. cold regions science and technology 32: 107-119. Available from: https://www.sciencedirect.com/science/article/pii/s0165232x00 000239
  13. Doust H., Omatsola E., 1990. Niger Delta. in: edwards, j.d. and santogrossi, p.a., eds., divergent/passive margin basins, AAPG memoir 48, American association of petroleum geologists, Tulsa: 239-248
  14. Everett, M. 2013. Near-Surface Applied Geophysics. Cambridge University press, 441 pp.
  15. Eze S.U., Ogagarue, D.O., Nnorom, S.L., Osung, W.E., Ibitoye, T.A 2021. Integrated geophysical and geochemical methods for environmental assessment of subsurface hydrocarbon contamination: Environ Monit Assess. 193:451. https://doi.org/10.1007/s10661-021-09219-3.
  16. Giadom, F.D., Akpokodje, E.G., Tse, A.C. 2015. Determination of migration rates of contaminants in a hydrocarbon-polluted site using non- reactive tracer test in the Niger Delta, Nigeria. Environmental earth sciences. 2015; doi.10.1007/s12665-015-4094-3.
  17. Ideozu, R. U., Iheaturu, T. C., Ugwueze, C. U., et al. 2018. Reservoir properties and sealing potentials of the Akani Oil Field structures, Eastern Niger Delta Nigeria. Jour nal Oil Gas Petrochemistry Science, 1(2), 56-65. https:// doi.org/10.30881/jogps.00012
  18. Ivanov, A. Y., Zatyagalova, V.V. 2008. A GIS approach to mapping oil spills in a marine environment. International Journal of Remote Sensing 29 (21): 6297 - 6313. Available from: https://doi.org/10.1080/01431160802175587
  19. Lane, Jr, J.W. et al. 2004. Application of cross-borehole radar to monitor fieldscale vegetable oil injection experiments for biostimulation. symposium on the application of geophysics to engineering and environmental problems (SAGEEP), 22 to 26 February 2004, Colorado springs, Colorado, proceedings of environmental and engineering geophysical society, 20 p. Available from:https://www.growkudos.com/publications/10.4133%252f1. 2923356.
  20. Maury, A.P., Ronde, V., Fiandaca, G., Balbarini, N., Auken, E., Bjerg, P., Christiansen, A. 2017. Detailed landfill leachate plume mapping using 2d and 3d electrical resistivity tomography-with correlation to ionic strength measured in screens. Journal of Applied Geophysics., 138:1-8. Available from: https://www.researchgate.net/publication/312381885.
  21. Nigerian Upstream Petroleum Regulatory Commission (NUPRC) 2002. Environmental Guidelines and Standards for the Petroleum Industry in Nigeria 1991 (Revised Edition); 2002 Available from:https://nesgroup.org/download_policy_drafts/Environment al%20Guidelines%20and%20Standards%20for%20the%20Petrol eum%20Industry%20in%20Nigeria%20%28%20EGASPIN%29% 20%282002%29%20Revised%20Edition_1661874693.pdf
  22. Nwankwo, C.N., Emujakporue, G.O. 2012. Geophysical method of investigating groundwater and sub-soil contamination-a case study; American Journal of environmental engineering, 2(3):49-53 https://doi.org/10.5923/j.ajee. 20120203.02
  23. Obasi, R.A., Balogun, O. 2001. Water quality and environmental impact assessment of water resources in Nigeria. African Journal of Environment Studies 2 (2) 228 -231.
  24. Okonny, I.P. 2002. Geology in Alagoa, E.J. and Derefaka, a (ed) the land and people of Rivers State, Eastern Niger Delta. Port Harcourt, Onyoma Research Publishers. 2002 [cited 2023 dec 30]
  25. Olaojo, A.A., Oladunjoye, M.A., Sanuade, O.A. 2018. Geoelectrical assessment of polluted zone by sewage effluent in University of Ibadan campus Southwestern Nigeria. Environ monitoring assess 190:24. https://doi.org/10.1007/s10661-017-6389-1
  26. Oyinkuro, O.A., Wariebi, K.A. 2017. Hydrocarbon spill site characterization by electrical resistivity tomography and ground penetrating radar methods -a review. Asian Journal of environment and ecology. 4(3): pp1-9.
  27. Park, S. 2001. Site investigation technology of contaminated soil and groundwater. Journal of Korean Society of Agricultural Engineers 43 (6), 45 -23.
  28. Patel, S.K., Verma, P., Siggh, G.S. 2019. Agricultural growth and land use land cover change in peri-India, environmental monitoring and assessment.191;600. doi:10.100f/s 10661-019-7736-1.
  29. Paterson, N. 1997. Remote mapping of mine wastes. in proceedings of exploration '97, fourth decennial international conference on mineral exploration, ed. A.G. Gubbins, 905-16. Toronto: prospectors and developers association of Canada.
  30. Pazdirek, O., Blaha, V. 1996. Examples of resistivity imaging using multi electrode-100 resistivity field acquisition system. Eage 58 th conference and technical exhibition extended Abstracts, Amsterdam.
  31. Pomposiello, c. et al., 2004. resistivity imaging and ground penetrating radar survey at gualeguaychú landfill, entre ríos province, Argentina: evidence of a contamination plume. Iaga wg 1.2 on electromagnetic induction in the earth proceedings of the 17th workshop, Hyderabad, India.
  32. Porsani, J.L. et al., 2004. The use of GPR and VES in delineating a contamination plume in a landfill site: a case study in SE Brazil. Journal of Applied geophysics. 55, no 3-4, pp. 199-209.
  33. Rosales, R.M., Martinez-Pagan, P., Faz, A. 2012. Detecting underground storage tanks and contaminated areas in petrol stations by using 2D ERT. Near Surface Geophysics 12: 1 -5
  34. Sauck, W.A. et al. 1998. High conductivities associated with a LNAPL plume imaged by integrated geophysical techniques. Jour. of environ. and engineering geophysics, vol. 2, no. 3, pp. 203-212
  35. Slater, I.D., Sandberg, S.K. 2000. Resistivity and induced polarization monitoring of salt transport under natural hydraulic gradients. Geophysics 65(2):408-420.
  36. Tamuno, S., Felix, J.M. 2006. Crude oil resources: a blessing or curse to Nigeria -the case of the Niger Delta. Journal of research in national development 4(2): 53 - 58. Available from: https://www.ajol.info/index.php/jorind/article/view/42332\
  37. Telford, W.M., Geldart, L.P., Sheriff, R.E 1990. Resistivity methods in: applied geophysics, 2nd edition, (Cambridge Univ. Press, Cambridge, uk) p 353-358. doi: https://doi.org/10. 1017/cbo9781139167932.012
  38. Uchegbulam, O., Ayolabi, E.A. 2014. Application of electrical resistivity imaging in investigating groundwater pollution in Sapele Area, Nigeria. Journal of water resource and protection.6:1369-1379. doi:10.4236/jwarp.2014.614126
  39. UNDP (United Nations Development Programme). 2006. Niger delta human development report. P76, http://www. hdr.undp.org/en/ repor ts/national reports/ africa/ nigeria. Accessed 12 Sept 2023
  40. United States Army Corps of Engineers (USACE) 1995. Geophysical exploration for engineering and environmental investigations. EM. 1110-1-1802. 208.
  41. Werkema, D., Atekwana, E., Endres, A., Sauck, W., Cassidy, D. 2003. Investigating the geoelectrical response of hydrocarbon contamination undergoing biodegradation. geophysical research letters 30 (12), 1647. Available from: https://agupubs.onlinelibrary.wiley.com/doi/10.1029/2003gl017

Related papers

Characterization of Hydrocarbon-Contaminated Sites Based on Geoelectrical Methods of Geophysical Exploration
Omar Delgado-Rodriguez

InTech eBooks, 2018

Electrical methods are effective tools for the characterization of oil-contaminated sites and are applied in defining the geometry of the contaminated plume and in designing the remedial process. The optimal methodology integrates geoelectric methods, data processing, and interpretation techniques. Electromagnetic profiling is a reliable and fast method used to provide the configuration of oil-contaminated plume from apparent resistivity map and used to guide the subsequent electrical resistivity tomography survey. From advanced field work methods, data processing, and interpretation procedures, electrical resistivity tomography survey provides the three-dimensional (3D) configuration of the contaminated plume, migration pathways, location of active contaminated sources, and information about lithology. For separate contaminated and clean zones, a petrophysical modeling is used for the calculation of soil resistivity based on groundwater salinity. Taking the pore-water salinity value into account, an inversion algorithm recalculates resistivity maps into maps of clay content, porosity, and cation exchange capacity, allowing a more accurate determination of the volume of contaminated soil. From clay content data, hydraulic conductivity values are calculated for determining the groundwater vulnerability due to vertical migration of contaminants from upper layers. The optimal geoelectric methodology is an efficient procedure to assess hydrocarbon-contaminated sites, with emphasis on large sites with deeper groundwater table.

View PDFchevron_right
Geoelectrical Soil Mapping for Subsurface Hydrocarbon Contaminant Characterization and Remediation Site Zoning at Alode, Central Niger Delta, Nigeria
N.A. Onomhoale

Physics and Chemistry of the Earth, 2024

Hydrocarbon impacts on subsurface environmental systems occur due to leaked buried pipelines, petroleum facilities sabotage and oil spills during exploration, production, and transportation. 2D geoelectric investigation was carried out on soils of hydrocarbon impacted site in Alode community, Eleme Local Government Area of Rivers State, Central Niger Delta, Nigeria. This was imperative due to the right-of-way spill along a sabotaged petroleum flow line that has been identified for remediation. This study employed a PASI 16 GL earth resistivity meter for Electrical Resistivity Tomography (ERT) with established 5 Wenner-4 electrode array survey lines consisting of 290 horizontal electrical profiles (HEP) probes. The survey was done in a grid format over 100 m lines at 1.5 m, 3 m, 6 m, 9 m, 12 m, and 15 m constant spacing to acquire high-resolution 2D geoelectric data. ERT data inversion was performed using GS RES2DINV and AGI Earth Imager software's to generate 2D resistivity subsurface imageries to map and delineate the hydrocarbon contaminations. The results showed resistivity values from 600 Ω-m to above 3500 Ω-m denoted impacted areas, extending beyond the maximum target depth of 6 m, as pertinent for soil excavation procedure during ex-situ remediation within the locality. ERT profiles displayed evident spill geometries at lines 1, 2 and 3 with only significant presence from below 2 m at lines 4 and 5. The result confirms the horizontal direction and vertical trajectory of the spill through a porous medium-grained sandy layer, providing information for impacted area zoning, conducting risk assessments, and designing and implementing appropriate remediation actions.

View PDFchevron_right
Hydrocarbon Spill Site Characterization by Electrical Resistivity Tomography and Ground Penetrating Radar Methods -a Review
Oki Austin

Assessment of the source and geometry of contaminated soils by hydrocarbon spills is the first step towards designing an effective remediation programme. Electrical Resistivity Tomorgraphy and Ground Penetrating Radar are shown in this review to easily delineate spills under certain conditions. On a 2D-geoelctric profile of the subsurface, recent hydrocarbons spills are reflected as highly resistive anomalous zones, as biodegradation occurs spills become more conductive and may be masked by conductive soil. On a radargram fresh hydrocarbon spills are observed in zones of saturation where resistive fresh hydrocarbon spills displaces conductive water in pore spaces creating anomalous zones. Accurate interpretation of geoelectric profiles and radargrams in the Niger Delta requires knowledge of the lithology of the site of contamination which could easily be obtained by shallow drilling or pitting. Mini-review Article

View PDFchevron_right
Application of Electrical Resistivity Tomography in Mapping Subsurface Hydrocarbon Contamination
Adetayo Folorunso

Earth Science Research, 2012

The subsurface soil around Baruwa community was reportedly contaminated by hydrocarbon not because the area falls within oil-producing community but it suffers from inceasant leakage from petroleum pipeline that supply petroleum products to hydrocarbon terminar located within the area. Thus, to ascretain the extent of contamination of the subsurface soil around the area, an integrated geophysical methods involving vertical electrical sounding (VES) and electrical resistivity tomography (ERT) supported with induced polarization (IP) and spontaneous potential (SP) methods were carried out. The hydrocarbon contaminated layers were marked out beneath each VES point by high resistivity ranging between 943Ωm and 4749Ωm at a depth of 1 to 35.44m below the surface. Similarly, ERT result shows that the subsurface soil around the investigated area has been contaminated at a shallow depth of about 2m downward with resistivity value above 1000Ωm. IP and SP data were Integrated to identify the sandy contaminated layers from clayey layer. IP value of 0 to 10mV/V and SP values of <+10mV were obtained over the sandy formation. The work shows that hydrocarbon leaking from the pipeline laid a few meters beneath the earth surface actually flow both upwardly (possibly due to seasonal variation in the water table which is usually close to the surface during rainy season) to the surface and downwardly at greater depth into the subsurface, through a porous medium-sandy layer. This may probably accounts for the reason while most of the handdug wells in the area are reportedly contaminated with hydrocarbon products.

View PDFchevron_right
Geophysical techniques in the study of hydrocarbon-contaminated soil
S. Straface

Bulletin of the Geological Society of Malaysia, 2008

Geophysical surveys in particular ground penetrating radar (GPR), electrical resistivity tomography (ERT) and vertical resistivity probe (VRP) were used in mapping subsurface geological structures and groundwater contaminants at Sungai Kandis, Klang to identify the approximate boundaries of contaminant plumes and to provide stratigraphic information at this site. The study area was formerly an illegal dumping site of hydrocarbon and toxic waste. A good correlation exists between GPR signatures, ERT layers, vertical resistivity probe and the contaminated soil. The presence of contaminant plumes as well as the water table are also observed in the GPR and ERT sections at depths approximately of 0.5 to 1 m. In this study, a total of 16 GPR traverses and 10 ERT lines with lengths from 30 to 100 m were established. VRP measurements were conducted in 14 shallow boreholes with a maximum depth of about 1m. The VRP results show high apparent resistivity values ranging from 200 to 10000 Ωm associated with oil contaminated layer. The presence of this layer was also detected in the 2D resistivity sections as a thin band of high resistivity values ranging from 60 to 200 Ωm. In the GPR section, the oil contaminated layer exhibits discontinuous, subparallel and chaotic high amplitude reflection patterns.

View PDFchevron_right

Related topics

  • Hydrocarbon Pollution
    • 580 California St., Suite 400
    San Francisco, CA, 94104
    © 2025 Academia. All rights reserved