Civil Engineering

Hydraulic jumps have many uses such as dissipation of energy while water is flowing over spillways, increasing the water surface channels for distribution, chlorinating of wastewater, and many other cases. The length of hydraulic jumps is one of the most important parameters in designing the stilling basin, however, it cannot be calculated by mathematical analyses only-experimental and laboratorial results should also be used. In this study, an artificial neural network (ANN) technique was developed to determine the length of the hydraulic jumps in a rectangular section with a horizontal apron. Two algorithms, namely Levenberg-Marquardt (LM) and gradient descent with momentum and adaptive learning rule back propagation (BP) are employed to reach optimum model. From the different model structures that were examined, an LM algorithm with a 3-4-1 structure was adapted as the final model. The selected model can predict the length of jumps with high accuracy and satisfy the evaluation criteria, with root mean square error RMSE = 0.01224, mean absolute percentage error MAPE = 2.59%, and coefficient of determination R 2 = 0.9962. A comparison between the selected ANN model and empirical Silvester equation was also done and the results showed that the ANN method is more precise.

Hydrologic forecasting plays an ever increasing role in water resource management, as engineers are required to make component forecasts of natural inflows to reservoirs for numerous purposes. Resulting forecast techniques vary with the system purpose, physical characteristics, and availability of data. As most hydrological parameters are subjected to the uncertainty, a proper forecasting method is of interest of experts to overcome the uncertainty. This paper presented an Artificial Neural Network (ANN) approach for forecasting of long term reservoir inflow using monthly inflow available data. A Levenberg-Marquardt Back Propagation (LMBP) algorithm has been used to develop the ANN models. In developing the ANN models, different networks with different numbers of neuron hidden layers were evaluated. A total of 21 years of historical data were used to train and test the networks. The optimum ANN network with 4 inputs, 5 neurons in hidden layer and one output was selected. To evaluate the accuracy of the proposed model, the Mean Squared Error (MSE) and the Correlation Coefficient (CC) were employed. The network was trained and converged at MSE = 0.0188 by using training data subjected to early stopping approach. The network could forecast the testing data set with the accuracy of MSE = 0.0283. Training and testing process showed the correlation coefficient of 0.7282 and 0.7228 respectively.

The use of HSC has been studied for many years in developed and developing countries also. Although HSC has a few disadvantages, it has many benefits. The concrete that has CS amounts in limits of 50 to100 Mpa is called HSC. One of the most important properties of HSC is CS that uses the 28-day CS in structural designs as a criterion. Sometimes due to limitations of time of project performance, construction problems and rapid decision for high performance, estimation of 28-day CS based on 7-day CS can be very useful. Based on tests and analysis of results, three sets of equations are determined with ANN and Regression methods and finally results are compared and the best method is recommended.

This study presents the first attempt to link the multi-algorithm genetically adaptive search method (AMALGAM) with a groundwater model to define pumping rates within a well distributed set of Pareto solutions. The pumping rates along with three minimization objectives, i.e. minimizing shortage affected by the failure to supply, modified shortage index and minimization of extent of drawdown within prespecified regions, were chosen to define an optimal solution for groundwater drawdown and subsidence. Hydraulic conductivity, specific yield parameters of a modular three-dimensional finite-difference (MODFLOW) groundwater model were first optimized using Cuckoo optimization algorithm (COA) by minimizing the sum of absolute deviation between the observed and simulated water table depths. These parameters were then applied in AMALGAM to optimize the pumping rate variables for an arid groundwater system in Iran. The Pareto parameter sets yielded satisfactory results when maximum and minim...

Most isolators have numerous displacements due to their low stiffness and damping properties. Accordingly, the supplementary damping systems have vital roles in damping enhancement and lower the isolation system displacement. Nevertheless, in many cases, even by utilising additional dampers in isolation systems, the occurrence of residual displacement is inevitable. To address this issue, in this study, a new smart type of bar hysteretic dampers equipped with shape memory alloy (SMA) bars with recentring features, as the supplementary damper, is introduced and investigated. In this regard, 630 numerical models of SMA-equipped bar hysteretic dampers (SMA-BHDs) were constructed based on experimental samples with different lengths, numbers, and cross sections of SMA bars. Furthermore, by utilising hysteresis curves and the corresponding ideal bilinear curves, the role of geometrical and mechanical parameters in the cyclic behaviour of SMA-BHDs was examined. Due to the deficiency of exi...

As the most commonly used construction material, concrete produces extreme amounts of carbon dioxide (CO2) yearly. For this resulting environmental impact on our planet, supplementary materials are being studied daily for their potentials to replace concrete constituents responsible for the environmental damage caused by the use of concrete. Therefore, the production of bio-concrete has been studied by utilizing the environmental and structural benefit of the bacteria, Bacillus subtilis, in concrete. This bio-concrete is known as self-healing concrete (SHC) due to its potential to trigger biochemical processes which heal cracks, reduce porosity, and improve strength of concrete throughout its life span. In this research paper, the life cycle assessment (LCA) based on the environmental impact indices of global warming potential, terrestrial acidification, terrestrial eco-toxicity, freshwater eco-toxicity, marine eco-toxicity, human carcinogenic toxicity, and human non-carcinogenic to...

Steel plates are used in the construction of various structures in civil engineering, aerospace, and shipbuilding. One of the main failure modes of plate members is buckling. Openings are provided in plates to accommodate various additional facilities and make the structure more serviceable. The present study examined the critical buckling load of rectangular steel plates with centrally placed circular openings and different support conditions. Various datasets were compiled from the literature and integrated into artificial intelligence techniques like Gene Expression Programming (GEP), Artificial Neural Network (ANN) and Evolutionary Polynomial Regression (EPR) to predict the critical buckling loads of the steel plates. The comparison of the developed models was conducted by determining various statistical parameters. The assessment revealed that the ANN model, with an R2 of 98.6% with an average error of 10.4%, outperformed the other two models showing its superiority in terms of...

In this study, the employment of the gene expression programming (GEP) technique in forecasting models on sustainable construction materials including mineral admixtures and civil engineering quantities (e.g., compressive strength), was investigated. Compared to the artificial neural networks (ANN) based formulations, which are often too complicated to be used, GEP-based derived models provide estimation equations that are reasonably simple and may be used for practical design purposes and even for hand calculations. Many popular models, such as best-fitted curves based on regression analyses, multi-linear regression (MLR), multinomial logistic regression (MNLR), and multinomial variate regression (MNVR), can also be used for construction materials properties modeling. However, due to the nonlinearity and complexity of the target properties, the models established using linear regression analyses may not reveal the precise behavior. Additionally, regression models lack generality, a...

The wrapping of concrete structures with fiber polymers has been an essential part of concrete technology aimed at the improvement of concrete performance indices during the construction and lifelong usage of the structures. In this paper, a universal representative database was collected from multiple literature materials on the effect of different fiber-reinforced polymers on the confined compressive strength of wrapped concrete columns (Fcc). The collected data show that the Fcc value depends on the FRP thickness (t), tensile strength (Ftf), and elastic modulus (Ef), in addition to the column diameter (d) and the confined compressive strength of concrete (Fco). Five AI techniques were applied on the collected database, namely genetic programming (GP), three artificial neural networks (ANN) trained using three different algorithms, “back Propagation BP, gradually reduced gradient GRG and genetic algorithm GA”, and evolutionary polynomial regression (EPR). The results of the five d...

In this research study, extensive literature searches on the compressive strength of concrete produced from the addition of fly ash (FA) and silica fume (SF) as extra constituents to the conventional concrete mixes, which gave rise to 330 mix points of concrete database. Due to the worrisome environmental impact of concrete production and usage in concrete activities, it has been pertinent to conduct the life cycle impact assessment of this procedure. Secondly, due to the over dependence of concrete production experts on laboratory exercise, there is also an urgent need to propose equations that reduce this dependence, that can be used in design, construction and performance evaluation of concrete infrastructure, hence the multi-objective nature of this research work. The results of the global warming potential (GWP) based on cement dosage show that Portland cement contributes about 90% of the total score. This is followed by the use of coarse aggregate contributing 6%, superplastic...

The development of sustainable concrete in achieving the developmental goals of the United Nations in terms of sustainable infrastructure and innovative technology forms part of the focus of this research paper. In order to move towards sustainability, the utilization of the by-products of agro-industrial operations, which are fly ash (FA) and rice husk ash (RHA), in the production of concrete has been studied. Considering the environmental impact of concrete constituents, multiple mechanical and hydraulic properties of fly ash (FA) and rice husk ash (RHA) concrete have been proposed using intelligent techniques; artificial neural network (ANN) and evolutionary polynomial regressions (EPR). Also, an intelligent mix design tool/chart for this case under study is proposed. Multiple data points of concrete materials, which were further reduced to ratios as follows; cement to binder ratio (C/B), aggregate to binder ratio (Ag/B), and plasticizer to binder ratio (PL/B) were used in this e...

Frequent laboratory needs during the production of concrete for infrastructure development purposes are a factor of serious concern for sustainable development. In order to overcome this trend, an intelligent forecast of the concrete properties based on multiple data points collected from various concrete mixes produced and cured under different conditions is adopted. It is equally important to consider the impact of the concrete components in this attempt to take care of the environmental risks involved in this production. In this work, 192 mixes of an ultra-high-performance lightweight concrete (UHPLC) were collected from literature representing different mixes cured under different periods and laboratory conditions. These mix proportions constitute measured variables, which are curing age (A), cement content (C), fine aggregate (FAg), plasticizer (PL), and rice husk ash (RHA). The studied concrete property was the unconfined compressive strength (Fc). This exercise was necessary ...

This study focuses on identifying damage in reinforced concrete (RC) beams using time-domain modal testing and wavelet analysis. A numerical model of an RC beam was used to generate various damage scenarios with different severities and locations. Acceleration time histories were recorded for both damaged and undamaged structures. Two damage indices, DI_MW and DI_SW, derived from the wavelet analysis, were employed to determine the location and severity of the damage. The results showed that different wavelet families and specific mother wavelets had varying effectiveness in detecting damage. The Daubechies wavelet family (db2, db6, and db9) detected damage at the center and sides of the RC beams due to good time and frequency localization. The Biorthogonal wavelet family (bior2.8 and bior3.1) provided improved time–frequency resolution. The Symlets wavelet family (sym2 and sym7) offered a balanced trade-off between time and frequency localization. The Shannon wavelet family (shan1-...

In this research study, extensive literature searches on the compressive strength of concrete produced from the addition of fly ash (FA) and silica fume (SF) as extra constituents to the conventional concrete mixes, which gave rise to 330 mix points of concrete database. Due to the worrisome environmental impact of concrete production and usage in concrete activities, it has been pertinent to conduct the life cycle impact assessment of this procedure. Secondly, due to the over dependence of concrete production experts on laboratory exercise, there is also an urgent need to propose equations that reduce this dependence, that can be used in design, construction and performance evaluation of concrete infrastructure, hence the multiobjective nature of this research work. The results of the global warming potential (GWP) based on cement dosage show that Portland cement contributes about 90% of the total score. This is followed by the use of coarse aggregate contributing 6%, superplasticizer, 3% and fine aggregates, 2%. These show the functions of CO 2 emissions and other greenhouses gas emissions in the entire system. Also, the result of the terrestrial acidification potential (TAP) for the concrete mixes in this study show that the lowest cement mix "C340-FAg658-FA0-SF15" has a human toxicity, both carcinogenic and non-carcinogenic that showed an added impact of about 14 kg of 1, 4 equivalents of dichlorobenzene (DCB eq.). This result is 428% less impact than other studies found in the literature that used FA. Finally, it was found that the addition of FA and SF in concrete has a lowering effect on the environmental impact indicators due to reduced cement dosage. Furthermore, the results of

The flow of Bingham non-Newtonian incompressible fluids like concrete is associated with the large deformation of materials. The modeling and simulation of these fluids’ flow behavior by using conventional numerical methods. suffer problem-formulation setbacks due to mesh distortion. In order to compensate for the mathematical inefficiencies encountered in the process, particle-based methods have evolved and been applied. Also, the use of some particle-based methods produces a stretch of unreliability due to the Eulerian algorithmic trail, which visits every particle edge allowing for revisiting vertices during its operation. This makes the model path cumbersome and time-consuming. Concrete flow is an important element of sustainable infrastructural development, and its understanding strengthens the efficiency of concrete handling and placement during construction activities. In this paper, a mesh-free method of modeling the flowability of self-compacting concrete (SCC) known as the...