Academia.eduAcademia.edu

Figure 1 – uploaded by Moh Yasin

See full PDFdownloadDownload figure
Figure 1 Experimental setup for displacement measurement using 4 bundle fiber

Figure 1 Experimental setup for displacement measurement using 4 bundle fiber

Related Figures (3)

4. CONCLUSION Figure 2 Variation of the output voltage with the displacement of the mirror from the fiber-optic probe. [Color figure can be viewed in the online issue, which is available at www.interscience.wiley.com] Figure 3 shows the linear range of the sensor for front and back slope. The slope is used to determine sensitivity of the sensor. As shown in the figure, the sensor achieves a sensitivity of 168.8 mV/mm over the range of 0.05—0.35 mm. Sensitivity of —29.8 mV/mm is also achieved over a range 1.05—2.20 mm. The higher range cannot be measured in this experiment due to limitation of our translation stage. The sensor shows a very good linearity in both ranges as shown in Figure 3. However, the graph exhibits the
4. CONCLUSION Figure 2 Variation of the output voltage with the displacement of the mirror from the fiber-optic probe. [Color figure can be viewed in the online issue, which is available at www.interscience.wiley.com] Figure 3 shows the linear range of the sensor for front and back slope. The slope is used to determine sensitivity of the sensor. As shown in the figure, the sensor achieves a sensitivity of 168.8 mV/mm over the range of 0.05—0.35 mm. Sensitivity of —29.8 mV/mm is also achieved over a range 1.05—2.20 mm. The higher range cannot be measured in this experiment due to limitation of our translation stage. The sensor shows a very good linearity in both ranges as shown in Figure 3. However, the graph exhibits the
Figure 3 Linear range of sensor for both slopes (a) front slope and (b) back slope. R represents linearity, which is nearly to 1. [Color figure can be viewed in the online issue, which is available at www.interscience. wiley.com]
Figure 3 Linear range of sensor for both slopes (a) front slope and (b) back slope. R represents linearity, which is nearly to 1. [Color figure can be viewed in the online issue, which is available at www.interscience. wiley.com]
Figure 1. Proposed corner-slot antenna: (a) extended view and (b) folded view
Figure 1. Proposed corner-slot antenna: (a) extended view and (b) folded view
Related topics:
Mechanical EngineeringDentistrySensors and SensingFiber Optic SensorsFiber optic sensorHybrid CompositesOptical physicsComposite resinsWavelength Division MultiplexingFluorescent probes
580 California St., Suite 400
San Francisco, CA, 94104
© 2025 Academia. All rights reserved