Academia.eduAcademia.edu

Figure 3 – uploaded by Praharsha Gurram

See full PDFdownloadDownload figure
Table 6: Summarized results Comparing the results of three disc brake rotors for different iterations:

Table 6 Summarized results Comparing the results of three disc brake rotors for different iterations:

Related Figures (6)

Static analysis is performed over a structure when the loads and boundary conditions remain stationary and do not change over time; it assumed that the load or field conditions are applied gradually. After designing three different disc brake rotors in CATIA V5 those three profiles are imported to ANSYS WORKBENCH 16.2 for further analysis such as static structural analysis, and transient thermal analysis. 3.3 Analysis of disc brake rotor:
Static analysis is performed over a structure when the loads and boundary conditions remain stationary and do not change over time; it assumed that the load or field conditions are applied gradually. After designing three different disc brake rotors in CATIA V5 those three profiles are imported to ANSYS WORKBENCH 16.2 for further analysis such as static structural analysis, and transient thermal analysis. 3.3 Analysis of disc brake rotor:
Steps involved in this analysis are: The transient thermal analysis determines the temperature and other thermal quantities that vary over time, engineers commonly use the temperature that a transient thermal analysis calculates as input to structural analysis for thermal stress heat transfer applications. A transient thermal analysis follows basically the same procedure as a steady state thermal analysis [11].
Steps involved in this analysis are: The transient thermal analysis determines the temperature and other thermal quantities that vary over time, engineers commonly use the temperature that a transient thermal analysis calculates as input to structural analysis for thermal stress heat transfer applications. A transient thermal analysis follows basically the same procedure as a steady state thermal analysis [11].
Fig 6: Vented with cross-drilled disc brake rotor
Fig 6: Vented with cross-drilled disc brake rotor
OOIN. 2LO/-/O7TU. [8]N. Balasubramanyam, Prof. Smt. G. Prasanthi, “Design and Analysis of Disc Brake Rotor for Two Wheeler”, IJMIT (International Journal of Mechanical and Industrial Technology), | Volume 1, Issue 1, Month: October 2013-March 2014. [9] R. Venkatramanan, SB. Kumaragurubaran, C. Vishnu Kumar, S. Shiva Kumar, B. Saravanan, “Design and Analysis of Disc Brake Rotor’, International Journal of Applied Engineering Research | Volume 10, 2015 | ISSN: 0973-4562. [10] Rahul RaosahebPind, Prof. Swami M.C, “Analysis and Computational Investigation of Brake Disc for Composite Material” JEDR (International Journal of Engineering Development and Research) | Volume 4, Issue 4, 2016 | ISSN: 2321-9939. [11 ]JanvijayPateriya, Raj Kumar Yadav, VikasMukhraiya, Pankaj Singh, “Brake Disc Analysis with the help of Ansys software” JMET (International Journal of Mechanical Engineering and Technology) | Volume 6, Issue 11, 2015 | ISSN: 0976-6340. [12]SunkaraSreedhar, Parosh, “Design and Structural analysis of Disc Brake using Catia and Ansys Workbench”, IRJET (International Research Journal of Engineering and Technology) | Volume 4, Issue 9, 2017 ISSN: 2395-0072. [13] Ali Belhocine, MostefaBouchetara, “Thermomechanical Modelling of Dry Contact in Automobile Disc Brake”, ELSEVIER Masson SAS (International Journal of Thermal Sciences). 2012 ISSN: 1290-0729.
OOIN. 2LO/-/O7TU. [8]N. Balasubramanyam, Prof. Smt. G. Prasanthi, “Design and Analysis of Disc Brake Rotor for Two Wheeler”, IJMIT (International Journal of Mechanical and Industrial Technology), | Volume 1, Issue 1, Month: October 2013-March 2014. [9] R. Venkatramanan, SB. Kumaragurubaran, C. Vishnu Kumar, S. Shiva Kumar, B. Saravanan, “Design and Analysis of Disc Brake Rotor’, International Journal of Applied Engineering Research | Volume 10, 2015 | ISSN: 0973-4562. [10] Rahul RaosahebPind, Prof. Swami M.C, “Analysis and Computational Investigation of Brake Disc for Composite Material” JEDR (International Journal of Engineering Development and Research) | Volume 4, Issue 4, 2016 | ISSN: 2321-9939. [11 ]JanvijayPateriya, Raj Kumar Yadav, VikasMukhraiya, Pankaj Singh, “Brake Disc Analysis with the help of Ansys software” JMET (International Journal of Mechanical Engineering and Technology) | Volume 6, Issue 11, 2015 | ISSN: 0976-6340. [12]SunkaraSreedhar, Parosh, “Design and Structural analysis of Disc Brake using Catia and Ansys Workbench”, IRJET (International Research Journal of Engineering and Technology) | Volume 4, Issue 9, 2017 ISSN: 2395-0072. [13] Ali Belhocine, MostefaBouchetara, “Thermomechanical Modelling of Dry Contact in Automobile Disc Brake”, ELSEVIER Masson SAS (International Journal of Thermal Sciences). 2012 ISSN: 1290-0729.
580 California St., Suite 400
San Francisco, CA, 94104
© 2025 Academia. All rights reserved