This project is based upon the study which means it is derived from experiment and observation ra... more This project is based upon the study which means it is derived from experiment and observation rather than theory. For the fulfilment of objective our first motive is selection of cutting tool & work tool material selection of various process and performance parameters after parameterssss selection aims to study various techniques for the optimization for that purpose literature review and industrial survey is conducted. The objective of this study was to utilize Taguchi methods to optimize surface roughness in turning mild steel, EN-8 and EN-31. The turning parameters evaluated are cutting speed of 200, 250, and 300 m/min, feed rate of 0.08, 0.12 and 0.15 mm/rev, depth of cut of 0.5 mm and tool grades of TN60, TP0500 and TT8020, each at three levels. The experiment was designed and carried out on the basis of standard L9 Taguchi orthogonal array. The results show that the Taguchi method is suitable to solve the stated problem with minimum number of trials as compared with full factorial design.
Document type Identification code Implementation date SOP STOR-WIM-001 14.1.19 Name and Function ... more Document type Identification code Implementation date SOP STOR-WIM-001 14.1.19 Name and Function Signature * Date * Prepared by Epaphras Tumuhimbise 10.1.19 Approved by COO 14.1.19 * To be handwritten to indicate approval 1 Suzanne Rupp Version number Change history 1.0 Date of this document Review period 2 years-January 2021 Next review date Comments on review Document ** Specific location Master Electronic file reference intranet) Electronic Intranet Confidential, unauthorised copying prohibited ** The author can issue a controlled copy of this document to a responsible individual within a section. This individual will then be responsible for maintaining the controlled copy within their section on behalf of the author.
Document type Identification code Implementation date SOP STOR-WIM-001 14.1.19 Name and Function ... more Document type Identification code Implementation date SOP STOR-WIM-001 14.1.19 Name and Function Signature * Date * Prepared by Epaphras Tumuhimbise 10.1.19 Approved by COO 14.1.19 * To be handwritten to indicate approval 1 Suzanne Rupp Version number Change history 1.0 Date of this document Review period 2 years-January 2021 Next review date Comments on review Document ** Specific location Master Electronic file reference intranet) Electronic Intranet Confidential, unauthorised copying prohibited ** The author can issue a controlled copy of this document to a responsible individual within a section. This individual will then be responsible for maintaining the controlled copy within their section on behalf of the author.
Uploads
Papers by pratik more